基于源质的煤基中间相小球体生成与可控演化

煤全组分族分离所得的密中质组是中间相小球体生成的来源物质（即源质）。以该源质为原料，制备煤基碳质中间相。考察了炭化过程中温度、恒温时间、氮气流速、原料进样方式和添加剂等因素对中间相小球体生成过程的影响，探讨了中间相小球体演化过程的可控性。结果表明：温度、恒温时间、进样方式是影响中间相小球体生成的主要因素，能够控制生成中间相小球体粒径大小；温度升高或恒温时间延长均会加剧原料分子的热反应，促进中间相小球体的生成和融并；大面积的融并将使粒度迅速增加，部分球体解体，球体数目下降，最终形成体中间相；进样方式主要通过影响小球体演化过程中挥发性气体的逸出及原料颗粒间热传递效率影响小球体的生成和发展；氮气流速起到辅助调控作用；添加剂的加入促进了原料成核，加速了小球体的生成。     

Sequence networks to the calculation of two-simultaneous faults at the same location

The system of symmetrical components (012-system) can be used to simulate symmetrical and asymmetrical operation of power systems. However, the classical literature of Power Systems Analysis does not present one equivalent circuit in 012-system to two-simultaneous faults where there are a single-line-to-ground fault and a bolted line-to-line fault. This paper presents the equations and the new equivalent circuit mentioned. In addition, we present a comparison of results between the proposed approach and the output of the commercial software ANAFAS, which validates the methodology. We find evidence that the new equivalent circuit developed can substitute the equivalent circuits used to calculate a single line-to-ground fault and a bolted line-to-line fault.     

基于PMAC的航空结构件柔性工装分布式控制系统设计

航空结构件是航空飞行器中的重要组成部分，航空结构件的自动化柔性工装质量直接影响航空飞行器的飞行安全水平。为降低系统位置和姿态控制误差，减小航空结构件的磨损面积，设计了基于PMAC的航空结构件柔性工装分布式控制系统。采用PMAC运动控制器，接收电子部件的反馈信号，控制步进电机、直流电机和交流电机。结合工控机、定位器、伺服电机和分布式通信网络，完成硬件系统的设计。根据航空结构件柔性工装操作设备的组成结构和工作原理，构建相应模型。确定航空结构件在目标曲面上的柔性工装位置，从移动位置和装配力两个方面，计算柔性工装控制量。在PMAC控制器的作用下，通过位姿的调整实现系统的航空结构件柔性工装分布式控制功能。系统测试结果表明，设计分布式控制系统的位置和姿态控制误差分别降低了13cm和0.32°，且设计系统控制下航空结构件的磨损面积较小。     

A new systematic firefly algorithm for forecasting the durability of reinforced recycled aggregate concrete

This study presents a new systematic algorithm to optimize the durability of reinforced recycled aggregate concrete. The proposed algorithm integrates machine learning with a new version of the firefly algorithm called chaotic based firefly algorithm (CFA) to evolve a rational and efficient predictive model. The CFA optimizer is augmented with chaotic maps and Lévy flight to improve the firefly performance in forecasting the chloride penetrability of strengthened recycled aggregate concrete (RAC). A comprehensive and credible database of distinctive chloride migration coefficient results is used to establish the developed algorithm. A dataset composite of nine effective parameters, including concrete components and fundamental characteristics of recycled aggregate (RA), is used as input to predict the migration coefficient of strengthened RAC as output. k-fold cross validation algorithm is utilized to validate the hybrid algorithm. Three numerical benchmark analyses are applied to prove the superiority and applicability of the CFA algorithm in predicting chloride penetrability. Results show that the developed CFA approach significantly outperforms the firefly algorithm on almost tested functions and demonstrates powerful prediction. In addition, the proposed strategy can be an active tool to recognize the contradictions in the experimental results and can be especially beneficial for assessing the chloride resistance of RAC.     

Microstructure and mechanical properties of Nb4AlC3 MAX phase synthesized by reactive hot pressing

The present study aims at synthesizing the Nb₄AlC₃ MAX phase by reactive hot pressing using Nb:Al:NbC as starting materials. In order to identify the reaction path, interrupted tests at intermediate temperatures were performed as well as differential thermal analyses (DTA) of powders. Coupling between DTA and XRD data and SEM/EDS analyses of the samples allows a better understanding of the reaction mechanisms. Pure and fully dense Nb₄AlC₃ samples were obtained and characterized for the first time by EBSD and SEM to assess, using an original method, grain size and microstructure. For instance, in the present study, an average grain length of 5–7?µm was obtained.Standard mechanical characterizations showed interesting properties: K_Ic≈?6?MPa?m^1/2, E?≈?350?GPa and α?≈?7.10^?6 °C^?1. Oxidation performance of Nb₄AlC₃ was evaluated at 1100?°C under cyclic conditions. A breakaway regime was instantaneously established for this condition, thus demonstrating the impossibility of using such an unprotected material for structural applications at high temperature in air environment.     

Dietary fibre extracted from different types of whole grains and beans: a comparative study

Dietary fibre (DF) from different whole grains and beans (quinoa, buckwheat, highland barley, pea and mung bean) was extracted by enzymatic action. The components, crystallinity and properties were comparatively studied. Furthermore, we evaluated correlations between DF components and their crystallinity, thermal, physicochemical and functional properties. Results showed quinoa DF had highest polyphenol (25.58 mg GAE per 100 g), pectin (4.68%) and cellulose (52.34%) contents, crystallinity value (CV, 30.24%), ΔH (185.53 J g⁻¹), water-holding capacity (WHC, 5.35 g g⁻¹), α-amylase activity inhibition ratio (α-AAIR, 13.34%) and glucose absorption capacity (GAC), but lowest protein content (9.78%) and T_p (163.05 °C). Mung bean DF had highest lignin content (33.56%), fat adsorption capacity (4.73 g g⁻¹), and T_p (176.25 °C), but lowest CV (15.26%) and ΔH (132.15 J g⁻¹). Correlation analysis showed cellulose content had positive linear correlations with CV, ΔH, WHC, α-AAIR and GAC, but a negative correlation with T_p. The structure and properties of DF are largely attributed to cellulose content.     

非隔离并网逆变器进网电流直流分量抑制策略参数优化设计

非隔离并网逆变器存在向电网注入直流电流的风险。而现有针对该问题的虚拟电容法的控制器参数选择未兼顾进网电流控制器的稳态和动态性能。为此,提出一种比例谐振和虚拟电容(PR+C)控制器参数优化方法。首先,通过控制系统传递函数分析了虚拟电容和PR控制器之间的相互影响,并由幅值和相位裕度约束系统稳定性,初步给出参数选择范围。其次,定义了表征基波电流跟踪性能和直流抑制效果的3个指标,通过客观赋权法得到目标函数后在选择范围内进行优化参数求解。最后,通过样机实验对比不同控制参数下的控制性能,验证了优化参数的有效性。最终结果表明,所提参数优化过程简单明了,能够客观地权衡直流分量抑制效果和进网电流跟踪能力。     

煤矿35 kV/6 kV终端变电所过流保护系统的优化研究

煤矿35kV／6kV终端变电所的优化运行方式为全分裂运行方式。过流保护系统的最佳方案应能满足全分裂运行方式和转换后各种运行方式(含故障条件)对保护的要求。     

鄂东南金属矿山尾矿堆积现状及其基本特征

截至2006年底,鄂东南以铁、铜为主的五类金属矿山的70座规模以上(含小型)尾矿库中,已堆积尾矿过亿m3。就物质成分看,尾矿乃为原矿经人工机械破碎-磨矿的碎屑堆积物;而外观为自然静水条件下的机械沉积物。除个别铅锌矿山尾矿外,尾矿中的主要有用成分有TFe(铁矿砂)、Cu、Au、WO3(白钨矿)和S,含多种伴生有用组分。尾矿"矿床"的开发和综合利用前景广阔。